Difference between revisions of "Remote Desktop"

From SingletonMillerWiki
Jump to: navigation, search
m
 
Line 6: Line 6:
  
 
<pre>
 
<pre>
sudo app-get install rdesktop
+
sudo apt-get install rdesktop
 
</pre>
 
</pre>
  
Haveing installed the remote desktop on the RPi the remote machine is accessed by something such as the example below
+
Having installed the remote desktop on the RPi the remote machine is accessed by something such as the example below (linux).
 +
You can also use the remote desktop gui on windows.
  
 
<pre>
 
<pre>

Latest revision as of 02:36, 24 May 2013


This describes how to use your RPi as a remote terminal to a Windows machine. It assumes that the Widows machine has Remote Desktop installed and enabled.

Firstly, install the remote desktop package on you RPi:

sudo apt-get install rdesktop

Having installed the remote desktop on the RPi the remote machine is accessed by something such as the example below (linux). You can also use the remote desktop gui on windows.

rdesktop -x:l -r sound:remote hostname

hostname can be replaced by an IP address

For a list of option see

man rdesktop

The example above indicates that the remote machine is on a LAN, i.e. -x:l gives maximum bandwidth and that the sound is to be left on the remote machine.

References

  1. http://www.raspberrypi.org/phpBB3/viewtopic.php?f=47&t=5814&p=90752