Auto Update Backup

From SingletonMillerWiki
Revision as of 11:38, 8 June 2013 by Martin (Talk | contribs) (Move the script to a better location)

Jump to: navigation, search


The goal here is to get a network connected Raspberry Pi to periodically update and backup itself up to an external device or network share.

This is heavily based on the developments presented here [1]

Installation

Copy the script to the home folder on your Raspberry Pi using wget.

cd ~
wget https://raw.github.com/martinrgmiller/RPiAutoBackup/master/AutoUpdateBackup.sh

Create a Backup Location

This location must not be physically on the Pi's SD card, it should be an external USB drive or other share on your network.

CIFS share

The script supports temporary and direct mounting of a network share. Alternatively you can auto mount the shares. Accessing Network Shares.

The method fo authentication for the CIFS shares is a credentials file. This file must be accessable and populated an example of a typical cred file can be found Accessing_Network_Shares#User_Specific_Actions

You must make sure that the location for the backup file is mounted and writeable.

Setup the script

The header of the script header documents the user defined parameters

    # EXTDIR must be external i.e. not on the SD card for example a usb stick or network share
    # BACKUPDIR is the location to write the backup on EXTDIR
    # PURGE determines if old backups are deleted before zipping the latest sucessful backup, PURGE=false
    # CIFSHOST is the optional network share host name or address, comment out to disable mounting a CIFSSHARE
    # CIFSSHARE is the share on the CIFSHOST, required if CIFSHOST is enabled
    # CIFSCRED is the local path to the CIFS credentials, required if CIFSHOST is enabled
    # CIFSUID is the users who has write permissions to CIFSSHARE, required if CIFSHOST is enabled

Edit these as required

CIFS example

    EXTDIR=/media/cifstemp/Public
    BACKUPDIR=$EXTDIR/RPi_autobuild_backup
    PURGE=false
    CIFSHOST=//192.168.0.8
    CIFSSHARE=Public
    CIFSCRED=/home/raspberrypi/cifs.cred
    CIFSUID=raspberrypi

External HDD example

Manually mount your USB drive first.

sudo mkdir /media/usbdrive
sudo mount /dev/sda1 /media/usbdrive

Edit the script settings to match

    EXTDIR=/media/usbdrive
    BACKUPDIR=$EXTDIR/RPi_autobuild_backup
    PURGE=true
    #CIFSHOST=//192.168.0.8
    CIFSSHARE=Public
    CIFSCRED=/home/raspberrypi/cifs.cred
    CIFSUID=raspberrypi

Here, CIFS mounting is disabled and PURGE has optionally been set to true to delete old backup off the usb drive due to capacity limitations.

Test the Script

$sudo sh AutoUpdateBackup.sh

Move the script to a better location

Assuming you've resolved all the permissions and the scripts runs, copy the script to cron.daily.

sudo cp /home/jack/AutoUpdateBackup.sh /etc/cron.daily/AutoUpdateBackup

Modify the permissions of the script to make it executable

sudo chmod +x /etc/cron.daily/AutoUpdateBackup

The script will now run once per day. Note we've all removed the file extension this is because cron doesn't like them.

Logfile

To redirect the output the the script to a logfile uncomment the following line in the script header

#exec &> /var/log/AutoUpdateBackup.log

to have the log rotate modify /etc/logrotate.d/rsyslog and add the following entry after /var/log/messages

/var/log/AutoUpdateBackup.log


References

  1. The Raspberry Pi Backup Thread
  2. how-do-i-add-jobs-to-cron-under-linux
  3. can-a-raspberry-pi-be-used-to-create-a-backup-of-itself