Difference between revisions of "I2C Setup"
From SingletonMillerWiki
(→Installation) |
|||
| Line 9: | Line 9: | ||
sudo modprobe i2c-bcm2708 | sudo modprobe i2c-bcm2708 | ||
</pre> | </pre> | ||
| + | Once the drivers have been added to the Kernel the I2C will appear as /dev/i2c-0 and /dev/i2c1. | ||
| + | |||
Download and install the i2c tools. This is not essential but it is useful for testing I2C devices from the command prompt. | Download and install the i2c tools. This is not essential but it is useful for testing I2C devices from the command prompt. | ||
Revision as of 11:06, 24 August 2012
Instructions for setting up and using the I2C interface on the Raspberry Pi.
Installation
Add the I2C drivers to the Linux Kernel.
sudo modprobe i2c-dev sudo modprobe i2c-bcm2708
Once the drivers have been added to the Kernel the I2C will appear as /dev/i2c-0 and /dev/i2c1.
Download and install the i2c tools. This is not essential but it is useful for testing I2C devices from the command prompt.
sudo apt-get install i2c-tools
Notes
This setup process has been tested on the following Raspberry Pi linux distributions
- Raspbian Wheezy 2012-08-16
