Difference between revisions of "Remote Desktop"
From SingletonMillerWiki
| Line 1: | Line 1: | ||
[[Category: RaspberryPi]] | [[Category: RaspberryPi]] | ||
| − | [http://www.raspberrypi.org/phpBB3/viewtopic.php?f=47&t=5814&p=90752] | + | [[http://www.raspberrypi.org/phpBB3/viewtopic.php?f=47&t=5814&p=90752]] |
This describes how to use your RPi as a remote terminal to a Windows machine. It assumes that the Widows machine has Remote Desktop installed and enabled. | This describes how to use your RPi as a remote terminal to a Windows machine. It assumes that the Widows machine has Remote Desktop installed and enabled. | ||
Revision as of 12:40, 14 June 2012
[[1]]
This describes how to use your RPi as a remote terminal to a Windows machine. It assumes that the Widows machine has Remote Desktop installed and enabled.
Firstly, install the remote desktop package on you RPi:
sudo app-get install rdesktop
Haveing installed the remote desktop on the RPi the remote machine is accessed by something such as the example below
rdesktop -x:l -r sound:remote hostname
hostname can be replaced by an IP address
For a list of option see
man rdesktop
The example above indicates that the remote machine is on a LAN, i.e. -x:l gives maximum bandwidth and that the sound is to be left on the remote machine.
